FREE airline interview information for SkyWest
This is only the first few lines of this interview experience, if you would like to read the full experience please go here!
Interview experience:
Interview was just as previous gouges have stated. The ATP written and mechanical aptitude test are combined into one (answered on the same sheet). I didn't study an asvab before going in because I had heard that the mech apt test was easy, common sense type stuff. That was true. The questions that I can remember were: a tank is filling with water at 180gph while a drain is letting out 2gpm, how long will it take to add 60 gallons to the tank; three balloons contain the same amount of gas, one small, one medium, one large, which one has the least pressure acting on the outside of it; four pictures of levers under a weight with the fulcrum at different locations, which one has the most mechanical advantage; a weight hooked to 3 pulleys with 100lbs of force pulling on the rope, what is the most weight that can be lifted; a larger 15 tooth gear is meshed with a smaller 10 tooth gear, if the large gear is turning at 200rpm how fast is the small gear turning; an emb leaves abc @ 240kts, 2 hours later a crj leaves abc at 480kts, both headed for the same destination, how long before the crj catches the emb; four gears of the same size meshed together in sort of a pyramid shape, if the top one turns this way which one(s) will turn
|
Copyright 2001-2008
AviationInterviews.com
Do not copy or reproduce any material contained within this web site!
|
|
Home